Single punching machine can suppress traditional Chinese medicine tablets, western medicine tablets, chewable tablets, calcium tablets, buccal tablets, spirulina tablets, milk tablets, candy tablets, effervescent tablets, medlar pills (health balls), aromatic tablets, taste blocks Disinfectant tablets, catalysts, fertilizer tablets, pesticide tablets, button batteries, electronic components, metallurgical powder ceramics, etc. It is a small bench-top electric (manual) continuous tableting machine. The machine is equipped with a die, the filling depth of the material and the thickness of the tablet can be adjusted.
The specific operation process is as follows:
1. The upper rush rises and the lower rush falls;
2. The feed boot is transferred to the die ring, and the particles in the boot are filled with the die hole;
3, the feed boots transfer away from the mold circumference, while the upper wash down, the particles are pressed into tablets;
4, the ups and downs have risen successively, the lower punches out the tablet from the die hole, until the bottom of the tablet is flush with the die ring;
5. The feed boot is transferred to the die ring and the tablet is pushed down to the die table and dropped into the receiver. At the same time, the lower punch is lowered. The die hole is filled with particles; if it is repeatedly pressed and released. The weight and hardness of the tablet (ie the amount of pressure) can be adjusted by means of a regulator. The lower the lower pressure, the greater the increase in the die hole capacity, which can increase the weight of the tablet; on the contrary, the thinner the film, the thinner and lighter the tablet. However, in any case, the film regulator must be used to make the undershoot When it rises to the high level of zui, the top must be flush with the die. The lower the lowering, the greater the pressure, and the harder the tablet; the higher the pressure, the lower the pressure and the looser the tablet.
Single punching machine features:
1 tableting method: can be electro-compressed, or can be manually pressed.
2 Scope of application: pharmaceutical tablets, food tablets, chemical tablets, pesticide tablets, veterinary tablets, etc.
3 tablet quality: the surface of the tablet is smooth and the tablet weight is uniform.
4 Output: 4000-6000 pieces per hour can be produced by electric tableting.
5 low raw material loss (zui low experimental material dosage is only 200 grams).
6 The weight, thickness and hardness of the native tablets can be adjusted, as long as different molds are replaced, different products can be pressed.
7 can be customized according to the user's requirements of various shaped molds, such as: round, oval, triangular, square and other shaped molds.
8 No professional operation technology, no professional technicians, ordinary staff will learn, you can get started with one operation, electric manual tableting, making machine operation easier.
9 The tablet press is made of cast iron and the mold is heat treated for a long time.
Squid Products
Squid Tube,Raw Squid Ring,Flower Cut Squid,Bqf Squid Tentacle And Tubes
Zhejiang ocean family co.,ltd , https://www.ocean-family.com