Cultivation facilities: Ordinary edible fungus greenhouses, built by about 25 cm layer height mushroom frame, each shelf about 5 to 7 layers. Fill the shed with fresh water, wait until the water has penetrated, and then sprinkle the lime powder in the shed to move the bag to the shelf.
Cooling equipment: multi-functional water temperature air conditioner, with summer cooling, winter temperature dual temperature adjustment effect, the use of good results. In the process of bacterial growth, the culture temperature can be reduced to 20~25°C.
Bacteria bag color conversion: The conventional production process is used for strain production and bag production. After the bacteria are all completed, the white bacteria bags can be triangle-shaped and the plastic film, grasshopper, etc. can be covered. While warming up, by adjusting the coverage of grasshoppers and plastic films and uncovering at night, one promotes the white hyphae on the surface of the bacteria bags to fall down, and secondly, increases the temperature difference of the bacteria bags and prompts them to change colors as soon as possible.
Temperature-regulating buds: After completing the color-changing bacteria bags, they can be moved into the shed after being perforated and replenished, separated by about 5 centimeters, and discharged in a single layer, and then cooled by the “multifunctional water temperature air conditionerâ€. Two days later, high-temperature stimulation was performed, and water, light, and other stimuli in the shed were used. After 7 days, small buds emerged. After that, routine water was used to minimize the difference in wetness so as to ensure the continuous emergence of mushroom buds. At this stage, the temperature is maintained at 25°C, and the air relative humidity is 75% to 95%. By adjusting the roof covering, the light intensity in the tent is maintained at 300 to 1200 lux.
Mushroom management: In the event of mushroom buds, cut the plastic film with a small blade, be careful not to hurt the mushroom buds. After extending from the young buds, it will enter the mushroom management stage. This stage should keep the temperature at 25°C, relative humidity of 80%~95%, and 500~1000 lux lighting and proper ventilation; when the cap diameter reaches 2cm In the above, the mushroom can be directly sprayed with three-dimensional nutrition essence.
Medical Cold Patch
Throat Pain Relief Patch
[Name] Medical Cold Patch
[Package Dimension] 36 round pieces
The Pain Relief Patch is composed of three layers, namely, backing lining, middle gel and protective film. It is free from pharmacological, immunological or metabolic ingredients.
[Scope of Application] For cold physiotherapy, closed soft tissue only.
[Indications]
The patches give fast acting pain relief for acute and chronic tonsillitis.
[How To Use a Patch]
Please follow the Schematic Diagram. One piece, one time.
The curing effect of each piece can last for 6-8 hours.
[Attention]
Do not apply the patch on the problematic skin, such as wounds, eczema, dermatitis,or in the eyes. People allergic to herbs and the pregnant are advised not to use the medication. If swelling or irritation occurs, please stop using and if any of these effects persist or worsen.notify your doctor or pharmacist promptly. Children using the patch must be supervised by adults.
[Storage Conditions] Store below 30c in a dry place away from heat and direct sunlight.
Throat Pain Relief Patch
Throat Pain Relief Patch,Throat Pain Relief Pad,Throat Pain Relief Plaster,Antitussive Patch
Shandong XiJieYiTong International Trade Co.,Ltd. , https://www.xjplaster.com