In order to ensure sufficient and excellent piglet pigs in rural areas, a part of farmers should feed sows. After 4-6 years of sow use, production performance will gradually decline and new sows must be renewed, selected, and reared. To choose to keep and nurture new sows, attention should be paid to the following six aspects.
1. If you choose to keep sows, you must look at the performance of the previous generation of sows. Select the sows that meet the characteristics of this breed, have a strong body, have many litters, have strong lactation, have good nursery performance, and have high piglet survival rate and strong feed intake. The specific requirements are: the head and neck are light and handsome, and the lower jaw is flat and free. The meat is about 18-24% of its body length. If the head is small or small, it can't be kept as a new sow. The forehead of the head should be wide (the forehead is wide and develops quickly). The ear should be thin and the ear root should be slightly stiff. The mouthpiece should be flush. Eyes are round, big, bright and godlike. The neck should have a medium length, head and neck and neck and trunk should be well connected without depression.
2. When selecting sows, attention should be paid to the general appearance of the body. The back is straight, the hindquarters are wide and well-developed, and the limbs are strong and slightly long. The body parts are well-balanced, and the hair is shiny, not fat and thin, and effective nipples. 6 pairs or more, there is a certain interval between the nipples, and neatly arranged, there is no vice nipples or dysplastic nipples.
3. The nipples are arranged neatly. The arrangement of the two rows of nipples should be symmetrical or in the shape of a product. There should be no nipple nipples, inverted nipples, or invalid nipples. There should be at least several pairs of normal nipples according to breed characteristics. At the same time, we must also pay attention to the shape of the nipple. We must choose “bubble through milk†and not “nail milkâ€. The so-called bubble milk, is to describe the shape of the nipple such as bubble through (ie through the grass), long shape, large and blunt; the so-called nail milk, is described as a nipple like a nail, the shape of the bubble than the short milk, small and pointed. In particular, nipples before and during lactation are more distinct. The bubble milk milk mound is well-developed and has a good milking function; the milk pool is enlarged and has more milk storage; the nipple tube is thicker and the milk is faster. Nail milk is the opposite. The difference between the two types of nipple suckling piglets was more pronounced in the mid-and late-stage lactation of sows. The number of sows to be selected for use lasts for about 4 years, that is, they will be eliminated after 7-8 births.
4. On the basis of choosing good male and female pigs, pay attention to the purposeful and planned cultivation of 2-3 piglets in the lactation period, and fix the preselected piglets on the front side of the sows with 2-4 pairs of milk. Nipples on the nipple, and do a good job of disease prevention and control.
5. After the newly sow is weaned, it should gradually use good green roughage as the main feed. Feeding gilts with green roughage can exercise their gastrointestinal function, and they can adapt to the needs of high fertility and high milking power after reaching adulthood. Legume grasses contain estrogen and can increase the fertility of the sow. The green roughage fed to the gilt is best for legumes. In order to ensure comprehensive nutrition, it is also necessary to properly mix bran feeds and supplement certain protein meals such as oil cakes and fishmeal.
6. The new sow pens should pay attention to the establishment of a sports field, allowing them to exercise more to enhance the sow's metabolism. Ensure that the pig house is clean and dry, regularly sterilized, and change frequently and diligently. Insecticide and injections are given regularly.
Polymer material is a multi-phase composite system with polymer as the main body, that is, few products are made of pure polymer, and most of them are used together with Polymer Additives. The purpose of adding polymer Additives is: 1. to meet the performance requirements; 2. to meet the molding requirements; 3. to meet the economic requirements. Polymer additives include plasticizers (DBP, DOP), phosphate esters (TCP trimethylphenyl phosphate), aliphatic dicarboxylic acids, lubricants, heat stabilizers, processing aids, reinforcing agents, toughening agents, curing agents, antioxidants, light stabilizers, fillers, solvents, foaming agents, and resistances. Propellant, coupling agent and antistatic agent.
Our Services
1. OEM(????) service is available.
2. Fast producing time.
3.Cheapest price forproduces.
4. Reply promptly in 24 hours.
5.Free sample available.
FAQ
Q1: product specifications?
A: we will pack the product specifications according to your needs.
Q2: Do you have some videos where we can see the line production?
A: Yes, we can provide some videos for reference. (yes, we can provide some videos).
Q3: How about payment terms? What kind of payment terms do you have?
A: 30% TT deposit + 70% TT before shipment, 50% TT deposit + 50% LC bala
Nce, Flexible payment can be negotiated.
Q4: what advantages do you have?
A: the quality of the products we offer can be guaranteed and will provide you with very competitive prices.
If you have any questions, please contact with us directly. Organic Intermediate are produced by HRT bearing With High Quality and Good Appearance. Welcome you can visit our Factory. For inqury, please send mail directly to us.
4 Formylmorpholine,4-Formylmorpholine 99%,Pentamethyldiethylenetriamine 98%,Synthetic Fiber Spinning Oil
Shandong Chenyi Environmental Protection Technology Co.,Ltd , https://www.chenyichemistry.com