The culture chamber of the strain should be regularly inspected and fumigation. When making the strain, the cotton ball should be tightly packed with the test tube, and a layer of kraft paper should be placed on the outside to prevent the pest from invading. If the pest has been found, it must be treated by fumigation or low-temperature freezing, and it can be used after inspection to confirm the death of the pest.
After collecting the mushrooms, carefully clean the noodles, remove the mushroom roots and mushrooms, and concentrate them deeply. The old cultivation room with serious disease should be fumigated (including used shelves, tools, etc.). The method is: fumigation is carried out in a ratio of 40 ml of formalin to 40 ml of potassium permanganate per cubic meter of volume, and the container containing potassium permanganate is deep, and its volume is larger than the total demand of formalin. 40 times or more. When fumigation, the cultivation room should be closed. After two days, the doors and windows should be opened for ventilation, and the bacteria bag should be fed in 24 hours. Sulfur fumigation can also be used, the dosage is 5 grams per cubic meter, and after 48 hours of sealing, it is ventilated for two days before feeding.
After collecting 3~4 mushrooms, remove the blocks in time and keep away from the mushroom house for high-temperature composting or spraying to prevent the pests from breeding in the waste. It is strictly forbidden to put a new mushroom room with a mushroom house to prevent the spread of pests into the new mushroom block. In addition to the fumigation and secondary fermentation of the culture material, the soil covering material is also subjected to high temperature or chemical treatment. To properly water, especially to avoid direct water spray to the mushroom body, too much water, excessive humidity in the mushroom bed and mushroom room, causing hyphae and mushroom buds to rot, easy to breed pests.
Disclaimer: Some articles on this website are transferred from the Internet. If legal rights of third parties are involved, please inform this website. phone
Wiggle wire lock is designed to be used with poly lock base cap- sold separately. Greenhouse wiggle wire and base care are an effective method of attaching your poly film roof and or shade cloth. The greenhouse wiggle wire lock will hold form 4 mil to 20 mil thickness of material. Use one wire to hold the roof in place and then add a second wire to hold your shade cloth. When it is time to remove the shade cloth, you will not disturb the roof plastic.
Universal Base (WIG2000)- used on the curved surface, i.e. the arch for attaching the end wall covering.
Standard Base (WIG1000) - used along the straight lengths of your greenhouse.
Greenhouse Wiggle Wire,Greenhouse Steel Wire,Greenhouse Spring Wire
JIANGSU SKYPLAN GREENHOUSE TECHNOLOGY CO.,LTD , https://www.spgreenhouse.com