High and low temperature test chamber pneumatic diaphragm pump machinery
High and low temperature test chamber pneumatic diaphragm pump mechanical diaphragm pump is small and easy to move, does not require foundation, occupies a very small ground, and is simple and economical to install. The pump will not overheat: the compressed air is used as the power, and it is a process of expansion and heat absorption when exhausting. The temperature of the pneumatic pump is reduced during operation, and no harmful gas is discharged from the high and low temperature test chamber. Can be used as a mobile material transfer pump. Pneumatic diaphragm pump is suitable for occasions. Because the pneumatic diaphragm pump has the above characteristics, the diaphragm pump in the world has gradually invaded the market of other pumps since its birth. In the hazardous and corrosive material processing, the diaphragm pump can connect the material with the outside world. Completely separated. And occupy some of them. For example, diaphragm pumps in the paint and ceramic industries have taken an absolute dominant position, while in other industries, environmental protection, wastewater treatment, construction, sewage, fine chemicals are expanding their market share, and other pumps are irreplaceable. Status. The advantages of pneumatic diaphragm pumps are:
Since it is powered by air, the flow rate is automatically adjusted as the back pressure (outlet resistance) changes, making it suitable for medium to high viscosity fluids. The working point of the centrifugal pump is set on the basis of water. If it is used for a fluid with a slightly higher viscosity, a reducer or a frequency converter is required, and the cost is greatly improved. The same is true for the gear pump. High and low temperature test chambers are reliable and low cost in pneumatic and flammable environments, such as fuel delivery, because: *, it is impossible to generate sparks after grounding; second, no heat is generated during work, the machine will not overheat; Third, the fluid does not overheat because the diaphragm pump's agitation of the fluid is small. Waste water discharge, due to many impurities in the sewage and complex components, the pipeline is prone to blockage, so that the load on the electric pump is too high, and the motor is hot and vulnerable. The pneumatic diaphragm pump can pass through the particles and the flow rate is adjustable, and the pipe is automatically stopped to be unobstructed when the pipe is blocked.
Compressed air is purified through the air dryer and filters to a certain level for main plant to work with. Air buffer is incorporated for smooth supply of compressed air thus to reduce fluctuation of compressed air source. The plant produces oxygen with PSA (pressure swing adsorption) technology, which is a time proven oxygen generation method. Oxygen of desired purity at 93%±3% is delivered to oxygen buffer tank for smooth supply of product gas. Oxygen in buffer tank is maintained at 4bar pressure.
With a cabinet for small capacity or container for big capacity, all the parts can be involved in, and removable with a vehicle.
Removable Oxygen Generator
Removable Oxygen Generator ,Oxygen Production Machine,Oxygen Breathing Apparatus,Oxygen Facility
Hunan Eter Medical Co., Ltd. , https://www.eter-tech.com