(a) chicken manure
Chicken manure is a kind of protein supplement with high quality and low price. Dry manure contains 15% - 30% of crude protein, 10% - 16% of crude fiber, 8% - 10% of various amino acids, and 1 kg of chicken. The crude protein content of feces is equivalent to 600 grams of concentrate. However, the crude protein in chicken manure contains 50% of non-protein nitrogen and is present in the form of uric acid. The energy is low and the ash content is as high as 25%-35%. Therefore, we must pay attention to treatment methods to increase pig utilization.
(1) Processing of chicken manure 1 Drying: Spread the chicken manure evenly on the concrete floor, air dry naturally, and the moisture content of the chicken manure is below 13%. The conditional person can use the dryer to dry. 2 Fermentation: Add rice bran, bran, grass powder, crop straw powder, etc. to the chicken manure, add proper amount of water, put it in a cylinder, pit or plastic bag, press tightly and seal it tightly, make acid for 3 to 5 days, ie Can be used to feed pigs. 3 Silage: Mix 60% of chicken manure, 30% of straw powder, 10% of bran, maintain humidity 60%, and store silage for 30--50 days.
(2) Addition of chicken manure Piglets can be added at 5% to -10%; finishing pigs can be added at 15% to 30%. However, when chicken manure is used as feed, one should collect fresh chicken manure without pollution in the non-epidemic area; second, more grain feed should be added to increase palatability and mineral balance; thirdly, the chicken manure contains high ash content. Note that the total amount of ash in the diet should not exceed the critical level; Fourth, chicken droppings should be stopped 15 days before the fat pigs are slaughtered.
(b) Rabbit feces
Rabbit manure has a high nutritional value. According to the American "Rabbit Practical Research" (1984) report, 7.9% of dried rabbit manure contains 92.1% of dry matter. The anhydrous rabbit manure contained 20.3% of crude protein, including 5.7% of digestible crude protein, 2.6% of ethyl ether extract, 16.6% of crude fiber, 40.7% of nitrogen-free extract, and 10.7% of mineral matter. The crude protein content of 2 kg of rabbit manure is equivalent to 1 kg of hay. Therefore, it is of great practical significance to develop and utilize rabbit manure as a new feed resource.
(1) The rabbit manure is processed as rabbit manure, first of all should go to the mud, to remove impurities, no mold, no pollution. The processing method generally uses the following methods: 1 Drying method: Collect clean rabbit excrement, dry it and pulverize it, lay a thin layer on the cement floor, expose it to sunlight for more than 3 hours, and mix it in the feed to feed the pig. This method is used more often in summer. 2 Boiling method: Collect fresh rabbit feces, then add the bran and other feed, boil 10 - 15 minutes, mix in the feed and feed the pig. This method is mostly used in winter. 3 soaking method: The dried rabbit manure crush into a cylinder, pots and other containers, add boiling water, stir into a paste to feed. 4 Direct feeding method: Collect fresh rabbit excrement on the day and mix it directly into feed for feeding pigs. 5 chemical treatment method: The dried rabbit manure was crushed, 200 ml per kg of formaldehyde solution was added and then dried and fed. This method can kill pathogenic microorganisms in rabbit feces without destroying nutrients. 6 alkali treatment method: the sun-dried rabbit feces into the tank, according to 50 kg of rabbit manure by adding 40% of the caustic soda solution 100 kg soaked for 24 hours, remove and put in clean water, drain after Can be used to feed pigs. 7 Lactic acid fermentation method: The rabbit feces were exposed to sunlight for 2 - 3 days, and the water was sprayed after crushing. It is advisable to add water to the rabbit manure in a group. Then into the water tank or plastic bag, compaction seals for anaerobic acid. It can be used when the fermentation temperature reaches 40 degrees Celsius. Summer usually takes 1-2 days and winter time is slightly longer. This method can be bactericidal, but also improve the palatability of rabbit feces. 8 Silage Fermentation Method: The collected rabbit manure is crushed and mixed with grass and vegetables, and appropriate amount of water is added to pick up the principle of no dripping. Then put the cylinder or cellar compaction, spread the bran, straw, rice bran, etc. for insulation, sealed for 1- 2 days later. Fermented rabbit manure is fragrant and delicious. This method is mostly used in summer and autumn.
(2) The amount of rabbit feces. Pigs were fed with the processed rabbit feces. Normal piglets were added at 10% to 15%, and finishing pigs were added at 15% to 25%. However, the amount added in the livestock diet should be determined by the amount of bran, rice bran, etc. added to the rabbit manure, and the additional bran can be increased appropriately. After fermentation, the rabbit feces are loose and soft, with aromas and palatability. Pigs are more willing to eat. However, feed should be stopped 20 days before the finishing pigs are slaughtered.
(c) cow dung
The cow is a ruminant. The feed that is eaten is digested by the ruminal microorganisms of the cow and some of the nutrients are absorbed and utilized. The other part of the nutrient can be excreted by protein nitrogen, microorganisms and ruminal fluids used by monogastric animals. It was determined that dry cow dung contains crude protein 10%-20%, crude fat 1%-3%, nitrogen-free extract 20%-30%, crude fiber 15%-30%, so it has certain Feeding value.
(1) Processing of cow dung The use of cow dung to feed pigs is best done by silage fermentation of cow dung. The method is: the cow dung is mixed with gluten, bran and other feed, and then put into a cellar, a cylinder or a plastic bag and compacted and sealed for fermentation. The fermented cow dung has good palatability and can replace some of the other feeds. Pigs gain more weight after eating.
(2) Adding amount of cow dung Breeding pigs and piglets are generally not suitable for cow dung, and the amount of cow's droppings in the diet for finishing pigs is preferably 10%-15%. There are more crude fibres in cow dung, so it is necessary to gradually increase the amount of feed and it is not advisable to add too much.
(d) Silkworm feces
Silkworm excrement, also known as silkworm excrement, is feces that silkworm larvae excrete. In production, feces from two to four sleeps of silkworms are used to feed livestock and poultry. It was determined that silkworm feces contained 29.2% of dry matter, 13% of crude protein, 10.1% of crude fiber, and some of carbohydrates and minerals.
(1) Processing of silkworm excrement The collected silkworm manure is dried and crushed and then added into clear water for about 3 hours. After being removed, it is mixed in a drink and used for feeding pigs.
(2) The amount of silkworm excrement added to the piglet diet can generally be about 5%, and the finishing pigs can be added at 5% to 10%. Silkworm excrement is very easy to moldy, so the moisture content during storage should be below 13%, it is best to use sun exposure; silkworm excrement contains a higher amount of lime, PH value is larger than the normal feed nearly 2 PH value, so in use When silkworm manure is fed to pigs, a certain amount of acid (such as acetic acid) should be added to adjust the pH to normal pH (pH=6), which will help improve feed quality, increase feed intake, and increase daily weight gain.
(five) peanut vine
Peanut contains 12% protein, nitrogen-free extract 45% - 50%, its digestive energy content of 8400 kJ / kg, containing about 20% of crude fiber. Its calcium and phosphorus contents were 0.89% and 0.13%, respectively. In terms of trace element content, in addition to the zinc content (3510-6) is lower than the nutritional standard, other elements such as iron, copper, manganese and other elements exceed the nutritional standards of pigs and is a relatively comprehensive feed for nutrition.
(1) Collection and Processing of Peanuts After the peanuts have matured, the peanuts are plucked and the peanuts are removed. The peanut vines can be dried directly in the field (preferably dried in the shade) and then crushed so that they can be added to the diet to feed the pigs; the vines can also be beaten after removing impurities and mixed into the feed to feed the pigs; of course Fresh vines can be freely eaten by pigs, but they are often wasted.
(2) Addition of Peanut Mangoes Peanut vines can be added to the diet of piglets by adding 5% - 10%, pigs (10% - 15%) and finishing pigs (15% - 20%) after being dried and crushed.
(6) Yellow bean leaves
Glycine leaf moisture content was 71.8%, crude protein was 6.1%, nitrogen-free extract was 14.8%, crude fat was 1.8%, crude fiber was 4.1%. Each kilogram of soybean leaves contains 9.3 grams of calcium and 0.7 grams of phosphorus. The crude protein content in 3 kg of soybean leaves is equivalent to 1 kg of bean cake.
(1) Collection and Processing of Soybean Leaves Soybean leaf collection is best performed during the maturity of soybeans. Because at this time the bean leaves are greener, nutrition is good, quality is good, and crude fiber is less. If collected early, the photosynthetic activity of the plants will be damaged, which will affect the absorption of nutrients by soybeans and reduce the yield and quality. If collected too late, the leaves of the beans will turn brown and the nutrient content will decrease, which will affect the feeding effect. After the collection, when feeding livestock and poultry, one can remove foreign matter from the collected fresh leaves, wash and chop and mix into the pig's diet; second, it can be processed into bean leaf flour. The method is to put the collected beans leaves in a dry and ventilated place, dry to about 30% moisture content, and then quickly dried to a moisture content of 10% or less, crushed Serve bean leaf powder spare. When fed, it can account for 20% - 30% in the diet of pigs. Third, semi-dry silage can be carried out. Soybean leaves have lower sugar content and higher protein content and are suitable for semi-dry silage. The method is to first air-dried the bean leaves to a moisture content of about 50%, chopped and packed into plastic bags for silage. This is convenient for storage, transportation, and good quality. The nutrient content is similar to that of the leaf, and it has a fruit aroma that can improve the palatability of the pig.
(2) Adding amount of soybean leaves Regardless of the method of processing soybean leaves, it can be added to 20% - 30% in pig diets, and can effectively promote pig growth and development and increase daily gain.
(7) Corncob powder (ie, male male flower)
Corn cob contains a lot of protein, carbohydrates, inorganic salts and so on. In the production, the corn cocoon can be blackened (at this time the pollination period has passed), and the corn cob is pulled out to dry and crushed, and the pig is fed into the diet in a proportion of 20% to 25%, and the effect is good.
(h) Sunflower flower disk
Sunflower disk contains about 10% - 20% of crude protein. After harvesting and smashing, it can be added to the pig's diet and can generally be added to 10% - 15%. Pigs are very fond of eating, and they grow faster after eating.
API (Active Pharmaceutical Ingredient) refers to a substance or substance combination used in manufacturing a drug product. API also refers to the active or central ingredient in the product which causes the direct effect on the disease diagnosis, prevention, treatment or cure. While API is the active component of a drug, excipients are the inactive or inert substances present in a drug.
An API starting material, usually a defined chemical property purchased in the market place or produced in-house, is used in the production of an API.
Active Pharmaceutical Ingredient manufacturing company Organic Herb Inc is a China-based company which is committed to producing ,developing and exploring active pharmaceutical ingredients and cosmetic active ingredients from pure natural source such as chinese herbal medicine extract and plant extract. As a leading company amount active pharmaceutical manufacturers, OHI adopts strict quality control system follow active pharmaceutical ingredients manufacture regulations to ensure the high quality of the products .From the Raw Material to the powder ,Ohi follow the NSF c-GMPs for Active Pharmaceutical Ingredients and we pledge that we will always uphold the highest standards of safety for our customers around the world with competitive market prices.
Active Pharmaceutical Ingredient (API)
Active Pharmaceutical Ingredient,Mucuna Extract Powder,Rosavin Extract Powder,Andrographolide Powder
Organic Herb Inc. , http://www.organic-extracts.com