Checking procedure before using the bag washing machine
1. Structure: The equipment consists of main parts such as cylinder, brush, spray pipe, transmission system, discharge device, water tank and water pump (see attached drawing).
2. Operation steps (1) Check whether the link bolts of each part are loose before use. If there is looseness, tighten the bolts first to start.
(2) Start the drum drive motor to make the drum run normally, the direction is correct, if the reverse rotation is to change the motor connection;
(3) Turn on the spray water pump to make the water spray evenly inside the cylinder of the washing machine. Be careful not to reverse the water pump;
(4) Check each operating part and make sure it can work after normal operation.
3. Working principle The material falls into the cylinder body, and the material is rotated and cleaned by the brush in the tank body. The dirt on the material is separated and discharged by the spray to the sewage outlet at the bottom of the tank body. The material is in the wool. Under the push of the brush, the paper is continuously moved forward, and after washing with washing liquid and water spray, it is moved to the discharge port, and finally discharged from the discharge port into the following process.
Shenzhen Jie Zhong Lian Investment Co., Ltd. , https://www.szmeizons.com