Tractor farm implements correctly mounted

Tractor field, field operations must be properly linked to ensure safety, the following common sense of the farm tool is provided to you, I believe it will help you.

First, when the farm tool is attached, the low-speed, small-throttle should be reversed, and the reversing brake should be ready at any time. The farm tools that are hooked up should be placed on a flat surface to prevent slipping during reversing. The hand of the implement should try to avoid the parts that are easily collided and crushed between the tractor and the implement.

2. When connecting agricultural implements, the connection between the upper pull rod and the left and right pull-down rods must be locked. When pulling the implements or trailers, the pull-down rod must be fixed as required to prevent swaying.

Third, when towing farm implements, high speeds and sharp turns are not allowed.

4. When using the power output, the coupling pin of the power transmission shaft and agricultural implement is fastened on the shaft and the shield is installed to prevent the shaft from throwing out and causing accidents. When using a pulley, the master-slave pulley must be in the same plane and keep the transmission belt tight. Always check the connection of the clip or screw in the belt joint to prevent the belt from breaking and hurting people. In combination with the transmission, the first low-speed operation, until everything is normal, before they can increase the speed.

5. When the locomotive is not stopped, weeds are not allowed to be removed; when the suspension device is not locked, operations under the farm tools are not allowed.

Sixth, when the width or length of the hanging or pulling agricultural implement is large, special attention should be paid to safety when walking or steering.

Our wooden working machine use advanced technique to make motor. So there is higher & stronger power. Using longevity is more longer. Little sparkling, perfect gear noise and more accurate cutting precision.
Circular Saw have plastic motor house and aluminium motor house. Big additional handle is more safety for using. Size is 7`,8`,9`,10`,12`.
Miter saw has more accurate adjustable precision.8427U is 12` biggest blade. Vertical and level adjustable degree is 0-45degree. More higher Input power. Size is 10`,12`.
Ordital grinder size is 93x185mm, 110x100mm
Electric trimmer has higher power. Make the working is more easy and more happy.
Corner assemblying machine give more professional tools to use.
Electric Chain Saw have 1600W high power. Easy user. Don`t like gasoline Chain Saw so complex operation.

Safety rules
1. Pls read the operation manual carefully before using.
2. Before installing the blade must check the machine no-load about one minute. After installing the blade. Check the blade is installed safety and work no-load normally. If there is abnormal, pls remove the blade and install again.
3. Don`t use any broken blade. Before install, must check the blade is safe and no broken.
4. Finishing working, pls take off the power quickly.
5. Keep work area clean.
6. Finishing working, clean and pack the machine and blade. Maintenance your working machine.

Woodworking Machine

Woodworking Machine,Combination Woodworking Machine,Combined Woodworking Machine,Multi Woodworking Machine

ZHE JIANG ULITE TOOLS MANUFACTURE CO.,LTD , http://www.ulitepowertool.com