What you need to pay attention to when installing the electronic tensile testing machine :
1. The electronic tensile testing machine needs to be installed in a clean, dry, no vibration, and the room temperature is between ten and twenty degrees. At the same time, the beam bending test should be done. The extensometer can also be used during the test; When you need to leave enough space around the device. The main body of the equipment and the dynamometer should be installed on the concrete. The size of the base should be installed according to the shape and the rules of the foundation drawing, leaving the holes for the anchor screws and the lower jaws and other wires and pipes.
Second, the basic upper plane must be very flat. When the alignment is correct, the level should be used. When the installation foundation is dry, the test machine can be installed. After the main body and the dynamometer are respectively transported to the concrete, the demand is based on the appearance. Adjust with the foundation map to ensure the spacing and direction between the main body and the dynamometer during the adjustment.
3. When the electronic tensile testing machine is installed, some small iron pieces can be inserted into the main body and the bottom of the dynamometer and then corrected. The main body can be used in the vertical position of the two columns when using the initial position of the Zui. To measure, you can use the square level to lean against the vertical and horizontal positions on the outer surface of the cylinder to align the plumbness of the equipment.
4. After correcting the initial accuracy of the equipment, it is necessary to switch on the oil pipe, power supply and oil filling before stopping the initial operation. If the initial operation is smooth, stop the accuracy of the equipment. When looking for a positive time, use a square instrument to lean on the working platform, find the vertical cylinder sag, adjust or increase or decrease the horn under the base, and control the error within a certain range.
When installing the electronic tensile testing machine , not only must it ensure professionalism, but also pay attention to precision. Of course, in the process of installation, various details must be ensured. Therefore, all the demanders should try to find professional qualifications when purchasing. Production companies, not only to ensure the quality of equipment, but also to provide professional installation services and after-sales service.
Jiangsu Tianhui Testing Machinery Co., Ltd. is a professional service manufacturer engaged in material testing and testing equipment. It integrates R&D, design, production, sales and service, and provides solutions for material testing and finished product testing.
In the bandages category, you will find a large selection of dressing materials for setting compression wraps and splints, or even relieving wraps. You can choose your ideal bandages like adhesive bandages, Paris bandages and various elastic bandages, such as short stretch bandages or long stretch bandages, with different material cotton , non woven, spandex and ect.
We also supply some special bandages with perfect effect. With the property of shaped faster, environmentally friendly and cleaner, Fiberglass casting tape replaced traditional Paris bandage. Sports bandages and Ice bandage could be used to relieve pain and mitigate edema for the hurt happend in sport.
If you would like look for Dressing Set which could be used to disinfect and clean the wound , you will find it in our Others category.
Bone Fracture Bandage,High Elastic Bandage,Polyester Elastic Bandage,Natural High Elastic Bandage
NINGBO YINGMED MEDICAL INSTRUMENTS CO.,LTD , https://www.chinayingmed.com