How high-speed emulsifier works

High-speed emulsifier is a necessary equipment for producing all kinds of ointments, ointments, cosmetics, skin care products, emulsifiable concentrates, etc. The machine is simple in structure, convenient in operation and reliable in performance. Suitable for pharmaceutical, biological, cosmetic, chemical, food, petroleum, and daily chemical industries.

The following is a brief introduction to the working principle of high-speed emulsifier, as follows:

The material is first preheated and stirred in water and oil pan, and then directly sucked into the homogenizing pot under vacuum through a conveying pipe.

The material is stirred in a homogenized pot through a Teflon scraper in the pot (the scraper always greets the pot shape, sweeping the wall adhesive), continuously creates a new interface, and then passes through the frame stirrer and reverse stirring The leaves are cut, compressed, folded, stirred, mixed and flowed down to the homogenizer below the pot, and then subjected to strong shearing, impact, turbulence, etc. between the rotor and the stator rotating at high speed. The material is cut in the shear gap and quickly broken into particles. Material micronization, emulsification, mixing, homogenization, dispersion, etc. can be completed in a short time.

Since the homogeneous pot is in a vacuum state, the bubbles generated during the stirring process of the material are taken away in time. After the homogenization is finished, raise the lid and press the dump button switch to discharge the material in the pot to the outer container of the pot (or open the bottom valve and the pressure valve to discharge directly).

The heating temperature of the homogenizing pan is displayed by the temperature controller on the control panel; the homogenizing stirring and the blade stirring can be used separately; or can be used at the same time; the length of the homogenizing mixing time is mastered by the user according to the properties of the material, and can be passed Control panel adjustment. After the work is finished, open the cleaning ball valve to clean the pot.