In the harvesting operation, it is common for the self-propelled combine harvester to encounter muddy feet (about 200mm) and no hard floor, especially during the summer. It is very difficult for the self-propelled combine harvester to break the track in such a field or to remove the crawler during operation and reinstall the track. So how can we install the track easily and quickly in this deep mud foot field? Now provide some tips to help the operators to operate: First, prepare two blocks of 500*400*100 (mm) size, put a block of wood before and after the harvester's base, and use the jack to lift the derailed side; Second, dig through the mud under the crawler belts at the drive wheels and guide wheels, and dig a little at the two sets of rollers in the middle (with no adhesion or adhesion when the crawler turns). Third, remove the guide wheel brackets. Two telescopic coils, all of the guide wheel brackets are pressed back into the rack guides. Fourth, the crawler belts are loaded back to the guide and drive wheels. Fifth, the diesel engine is started, a low gear is hung, and it is pulled on the side without pulling off the track. Separate the brake handle and slowly lower the walking clutch so that the crawler can be quickly and positively mounted by the engine.
Dental Imaging
Intra Oral Camera,Dental Oral Camera,Internal Oral Camera
Dental Radiography Co., Ltd. , http://www.nsdentals.com